AudioCodes Mediant 800B MSBR User Manual page 265

User's Manual

To configure an SRD:
1. Open the SRD Table page (Configuration tab > VoIP menu > VoIP Network > SRD
Table).
2. Click Add; the following dialog box appears:
3. Configure an SRD according to the parameters described in the table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Parameter
Index
[SRD_Index]
SRD Name
CLI: name
[SRD_Name]
Media Realm Name
CLI: media-realm
[SRD_MediaRealm]
Version 6.8
Figure 21-4: SRD Settings Page
Table 21-3: SRD Table Parameter Descriptions
Defines an index for the new table record.
Defines an arbitrary name to easily identify the SRD.
The valid value can be a string of up to 21 characters.
Note: This parameter is mandatory.
Assigns a Media Realm to the SRD. The listed Media
Realms are the identifiable names that you configured
for the Media Realms in the 'Media Realm Name' field
of the Media Realm table (see ''Configuring Media
Realms'' on page 259).
Note: If the Media Realm is later deleted from the
Media Realm table, this value becomes invalid in the
SRD table.
Description
265
21. Control Network
Mediant 800B MSBR