AudioCodes Mediant 800B MSBR User Manual page 213

User's Manual

To configure an LDAP server:
1. Open the LDAP Configuration Table page (Configuration tab > VoIP menu >
Services > LDAP > LDAP Configuration Table).
2. Click Add; the following dialog box appears:
3. Configure an LDAP server according to the parameters described in the table below.
4. Click Submit.
Table 19-2: LDAP Configuration Table Parameter Descriptions
Parameter
Index
[LdapConfiguration_Index]
LDAP Server IP
CLI: server-ip
[LdapConfiguration_LdapConf
ServerIp]
LDAP Server Port
CLI: server-port
[LdapConfiguration_LdapConf
ServerPort]
LDAP Server Max Respond Time
CLI: max-respond-time
[LdapConfiguration_LdapConf
ServerMaxRespondTime]
Version 6.8
Figure 19-7: LDAP Configuration Table - Add Record
Defines an index number for the new table record.
Note: Each table row must be configured with a unique index.
Defines the IP address of the LDAP server (in dotted-decimal
notation, e.g., 192.10.1.255).
By default, no IP address is defined.
Note: If you want to use an FQDN for the LDAP server, leave this
parameter undefined and configure the FQDN in the 'LDAP
Server Domain Name' parameter (see below).
Defines the port number of the LDAP server.
The valid value range is 0 to 65535. The default port number is
389.
Defines the time (in seconds) that the device waits for LDAP
server responses.
The valid value range is 0 to 86400. The default is 3000.
Note: If the response time expires, you can configure the device
to use its local database (Web Users table) for authenticating the
user. For more information, see ''Configuring Local Database for
Management User Authentication'' on page 223.
Description
213
19. Services
Mediant 800B MSBR