Configuration Parameters Reference; Management Parameters; General Parameters - AudioCodes Mediant 800B MSBR User Manual

Mediant 800B MSBR
67

Configuration Parameters Reference

The device's VoIP functionality (not data-routing functionality) configuration parameters,
default values, and their descriptions are documented in this section.
Note:
parameters and their enumeration values.
67.1

Management Parameters

This section describes the device's management-related parameters.

67.1.1 General Parameters

The general management parameters are described in the table below.
Parameter
WAN OAMP Interface
CLI: bind GigabitEthernet
<slot/port.vlanId> oamp
[OAMPWanInterfaceName]
Web: Allow WAN access to
HTTP
CLI: wan-http-allow
[AllowWanHTTP]
Web: Allow WAN access to
HTTPS
CLI: wan-https-allow
[AllowWanHTTPS]
Web: Allow WAN access to
SNMP
CLI: wan-snmp-allow
[AllowWanSNMP]
Web: Allow WAN access to
Telnet
CLI: wan-telnet-allow
[AllowWanTelnet
Web: Allow WAN access to
SSH
CLI: wan-ssh-allow
[AllowWanSSH]
Version 6.8
Parameters and values enclosed in square brackets [...] represent the ini file
Table 67-1: General Management Parameters
Binds the OAMP interface to a WAN interface, which can later be
associated with a Virtual Routing and Forwarding (VRF).
Enables WAN access to the management interface through HTTP.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Enables WAN access to the management interface through HTTPS.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Enables WAN access to the management interface through SNMP.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Enables WAN access to the management interface through Telnet.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
Enables WAN access to the management interface through SSH.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
67. Configuration Parameters Reference
Description
763 Mediant 800B MSBR