Ssh Parameters - AudioCodes Mediant 800B MSBR User Manual

Parameter
Web: TLS Expiry Check Start
CLI: expiry-check-start
[TLSExpiryCheckStart]
Web: TLS Expiry Check Period
CLI: expiry-check-period
[TLSExpiryCheckPeriod]

67.4.5 SSH Parameters

Secure Shell (SSH) parameters are described in the table below.
Parameter
Web/EMS: Enable SSH Server
CLI: ssh
[SSHServerEnable]
Web/EMS: Server Port
cli: ssh-port
[SSHServerPort]
Web/EMS: SSH Admin Key
CLI: ssh-admin-key
[SSHAdminKey]
Web: Require Public Key
EMS: EMS: SSH Require Public
Key
CLI: ssh-require-public-key
[SSHRequirePublicKey]
Web: Max Payload Size
EMS: SSH Max Payload Size
CLI: ssh-max-payload-size
[SSHMaxPayloadSize]
Web: Max Binary Packet Size
EMS: SSH Max Binary Packet
Size
CLI: ssh-max-binary-packet-size
[SSHMaxBinaryPacketSize]
Web: Maximum SSH Sessions
EMS: Telnet SSH Max Sessions
CLI: ssh-max-sessions
[SSHMaxSessions]
Web: Enable Last Login Message
CLI: ssh-last-login-message
[SSHEnableLastLoginMessage]
User's Manual
Defines the number of days before the installed TLS server
certificate is to expire at which the device must send a trap
(acCertificateExpiryNotification) to notify of this.
The valid value is 0 to 3650. The default is 60.
Defines the periodical interval (in days) for checking the TLS
server certificate expiry date.
The valid value is 1 to 3650. The default is 7.
Table 67-28: SSH Parameters
Enables the device's embedded SSH server.

[0] Disable (default)

[1] Enable
Defines the port number for the embedded SSH server.
Range is any valid port number. The default port is 22.
Defines the RSA public key for strong authentication for logging in
to the SSH interface (if enabled).
The value should be a base64-encoded string. The value can be
a maximum length of 511 characters.
Enables RSA public keys for SSH.

[0] = (Default) RSA public keys are optional if a value is
configured for the parameter SSHAdminKey.

[1] = RSA public keys are mandatory.
Note: To define the key size, use the TLSPkeySize parameter.
Defines the maximum uncompressed payload size (in bytes) for
SSH packets.
The valid value is 550 to 32768. The default is 32768.
Defines the maximum packet size (in bytes) for SSH packets.
The valid value is 582 to 35000. The default is 35000.
Defines the maximum number of simultaneous SSH sessions.
The valid range is 1 to 5. The default is 2 sessions.
Enables message display in SSH sessions of the time and date of
the last SSH login. The SSH login message displays the number
of unsuccessful login attempts since the last successful login.

[0] Disable

[1] Enable (default)
802
Mediant 800B MSBR
Description
Description
Document #: LTRT-12813