Message Waiting Indication Parameters - AudioCodes Mediant 800B MSBR User Manual

Parameter
Notes:

These parameters are applicable only to FXS interfaces.

For a description of this feature, see Call Forward Reminder Ring on page 433.
Web/EMS: Enable NRT
Subscription
CLI: nrt-subscription
[EnableNRTSubscription]
Web: AS Subscribe
IPGroupID
CLI: as-subs-ipgroupid
[ASSubscribeIPGroupID]
Web: NRT Retry
Subscription Time
EMS: NRT Subscription
Retry Time
[NRTSubscribeRetryTime]
Web/EMS: Call Forward
Ring Tone ID
CLI: cfe-ring-tone-id
[CallForwardRingToneID]
67.10.5.4

Message Waiting Indication Parameters

The message waiting indication (MWI) parameters are described in the table below.
Parameter
Web: Enable MWI
EMS: MWI Enable
CLI: enable-mwi
[EnableMWI]
Web/EMS: MWI Analog Lamp
CLI: mwi-analog-lamp
[MWIAnalogLamp]
User's Manual
Enables endpoint subscription for Ring reminder event notification
feature.

[0] Disable (default)

[1] Enable
Defines the IP Group ID that contains the Application server for
Subscription.
The valid value range is 1 to 8. The default is -1 (i.e., not configured).
Defines the Retry period (in seconds) for Dialog subscription if a previous
request failed.
The valid value range is 10 to 7200. The default is 120.
Defines the ringing tone type played when call forward notification is
accepted.
The valid value range is 1 to 5. The default is 1.
Table 67-48: MWI Parameters
Enables Message Waiting Indication (MWI).

[0] Disable (default).

[1] Enable
Notes:

This parameter is applicable only to FXS interfaces.

The device supports only the receipt of SIP MWI NOTIFY
messages (the device doesn't generate these messages).

For more information on MWI, see ''Message Waiting
Indication'' on page 436.
Enables the visual display of MWI.

[0] Disable (default).

[1] Enable = Enables visual MWI by supplying line voltage
of approximately 100 VDC to activate the phone's lamp.
Notes:

This parameter is applicable only for FXS interfaces.

This parameter can also be configured in a Tel Profile.
888
Mediant 800B MSBR
Description
Description
Document #: LTRT-12813