To configure PoE:
1.
Open the Power Over Ethernet Settings page (Configuration tab > System menu >
Power over Ethernet Settings).
2.
Select the 'Index' radio button corresponding to the required LAN port.
3.
Click the Edit button.
4.
From the 'Port Enable' drop-down list, select whether you want to enable or disable
PoE.
5.
In the 'Max Power' field, enter the required maximum power consumption for the port.
6.
From the 'AT Enable' drop-down list, select whether you want to enable PoE
according to IEEE 802.3at.
7.
Click Apply.
User's Manual
Figure 15-1: Power Over Ethernet Settings Page
126
Mediant 800B MSBR
Document #: LTRT-12813