AudioCodes Mediant 800B MSBR User Manual page 332

Parameter
Web: P-Asserted-Identity
CLI: sbc-assert-identity
[IpProfile_SBCAssertIdentity]
Web: Diversion Mode
CLI: sbc-diversion-mode
[IpProfile_SBCDiversionMode]
Web: History-Info Mode
CLI: sbc-history-info-mode
[IpProfile_SBCHistoryInfoMode]
Web: Fax Coders Group ID
CLI: sbc-fax-coders-group-id
[IpProfile_SBCFaxCodersGroupID]
Mediant 800B MSBR
Description
Note: If the device interworks between different DTMF
methods and one of the methods is in-band DTMF
packets (RFC 2833), detection and generation of DTMF
methods requires DSP resources.
Defines the device's handling of the SIP P-Asserted-
Identity header for this SIP entity. This header indicates
how the outgoing SIP message asserts identity.

[0] As Is = (Default) P-Asserted Identity header is not
affected and the device uses the same P-Asserted-
Identity header (if present) in the incoming message for
the outgoing message.

[1] Add = Adds a P-Asserted-Identity header. The
header's values are taken from the source URL.

[2] Remove = Removes the P-Asserted-Identity
header.
Notes:

This parameter affects only the initial INVITE request.

The corresponding global parameter is
SBCAssertIdentity.
Defines the device's handling of the SIP Diversion header
for this SIP entity.

[0] As Is = (Default) Diversion header is not handled.

[1] Add = History-Info header is converted to a
Diversion header.

[2] Remove = Removes the Diversion header and the
conversion to the History-Info header depends on the
SBCHistoryInfoMode parameter.
For more information on interworking of the History-Info
and Diversion headers, see Interworking SIP Diversion
and History-Info Headers on page 521.
Note: If the Diversion header is used, you can specify the
URI type (e.g., "tel:") to use in the header, using the
SBCDiversionUriType parameter.
Defines the device's handling of the SIP History-Info
header for this SIP entity.

[0] As Is = (Default) History-Info header is not handled.

[1] Add = Diversion header is converted to a History-
Info header.

[2] Remove = History-Info header is removed from the
SIP dialog and the conversion to the Diversion header
depends on the SBCDiversionMode parameter.
For more information on interworking of the History-Info
and Diversion headers, see Interworking SIP Diversion
and History-Info Headers on page 521.
Assigns a Coders Group ID to define the supported fax
coders for fax negotiation for this SIP entity. For
configuring Coder Groups, see Configuring Coder Groups
on page 310.
Note: The parameter is applicable only if you set the
IpProfile_SBCFaxBehavior parameter to a value other
332
Mediant 800B MSBR
Document #: LTRT-12813