Open Solution Network (Osn) Parameters; Quality Of Service Parameters - AudioCodes Mediant 800B MSBR User Manual

Multi-service business router; session border controller
Hide thumbs Also See for Mediant 800B MSBR:
Table of Contents

Advertisement

Mediant 800B MSBR

67.2.3 Open Solution Network (OSN) Parameters

The OSN server parameters are described in the table below.
Parameter
Web: OSN Native VLAN
ID
CLI: configure system >
interface osn > native-vlan
<id>
[OSNAccessVlan]
Web: Block OSN Port
CLI: configure system >
interface osn > shutdown
[OSNBlockPort]

67.2.4 Quality of Service Parameters

The Quality of Service (QoS) parameters are described in the table below.
Parameter
Layer-2 Class Of Service (CoS) Parameters (VLAN Tag Priority Field)
Web: DiffServ Table
EMS: QoS Settings – DSCP to QoS
Mapping
CLI: configure voip > vlan-mapping
[DiffServToVlanPriority]
Layer-3 Class of Service (TOS/DiffServ) Parameters
Web: Media Premium QoS
EMS: Premium Service Class Media Diff
Serv
CLI: media-qos
Version 6.8
Table 67-12: OSN Parameters
Defines the OSN Native VLAN ID.
The valid value is 0 to 4000. When set to 0 (default), the OSN uses the
device's OAMP VLAN ID. When set to any other value, it specifies a
VLAN ID configured in the Ethernet Device table and which is assigned
to a Media and/or Control application in the Interface table.
Enables or disables the Ethernet port of the internal switch that
interfaces with the OSN.
[0] Enable (default)
[1] Disable
Table 67-13: QoS Parameters
This table parameter configures DiffServ-to-VLAN Priority
mapping. For each packet sent to the LAN, the VLAN
Priority of the packet is set according to the DiffServ
value in the IP header of the packet.
The format of this ini file is as follows:
[ DiffServToVlanPriority ]
FORMAT DiffServToVlanPriority_Index =
DiffServToVlanPriority_DiffServ,
DiffServToVlanPriority_VlanPriority;
[ \DiffServToVlanPriority ]
For example:
DiffServToVlanPriority 0 = 46, 6;
DiffServToVlanPriority 1 = 40, 6;
DiffServToVlanPriority 2 = 26, 4;
DiffServToVlanPriority 3 = 10, 2;
For a description of this table, see Configuring Quality of
Service on page 142.
Note: For this parameter to take effect, a device reset is
required.
Global parameter that defines the DiffServ value for
Premium Media CoS content. You can also configure this
functionality per specific calls, using IP Profiles
(IpProfile_IPDiffServ). For a detailed description of this
779
67. Configuration Parameters Reference
Description
Description
Mediant 800B MSBR

Advertisement

Table of Contents
loading

Table of Contents