Dtmf And Hook-Flash Parameters - AudioCodes Mediant 800B MSBR User Manual

Mediant 800B MSBR
Parameter
Web: Profile Number
EMS: Allocation Profile
[V1501AllocationProfile]
Web/EMS: SSE Payload Type Rx
CLI: V1501-SSE-payload-type-rx
[V1501SSEPayloadTypeRx]
Web/EMS: SSE Redundancy
Depth
CLI: SSE-redundancy-depth
[V1501SSERedundancyDepth]
Web: SPRT Transport Ch.0 Max
Payload Size
CLI: SPRT-transport-channel0-
max-payload-size
[V1501SPRTTransportChannel0
MaxPayloadSize]
Web: SPRT Transport Ch.2 Max
Payload Size
CLI: SPRT-transport-channel2-
max-payload-size
[V1501SPRTTransportChannel2
MaxPayloadSize]
Web: SPRT Transport Ch.2 Max
Window Size
CLI: SPRT-transport-channel2-
max-window-size
[V1501SPRTTransportChannel2
MaxWindowSize]
Web: SPRT Transport Ch.3 Max
Payload Size
CLI: SPRT-transport-channel3-
max-payload-size
[V1501SPRTTransportChannel3
MaxPayloadSize]

67.10.2 DTMF and Hook-Flash Parameters

The DTMF and hook-flash parameters are described in the table below.
Parameter
Hook-Flash Parameters
Version 6.8
originating fax does not wait for an answer, but immediately starts
sending T.38 packets to the terminating fax machine.
Note: To enable No-Op packet transmission, use the
NoOpEnable and NoOpInterval parameters.
Defines the V.150.1 profile, which determines how many DSP
channels support V.150.1.
The value range is 0 to 20. The default is 0.
Note: For this parameter to take effect, a device reset is required.
Defines the V.150.1 (modem relay protocol) State Signaling
Event (SSE) payload type Rx.
The value range is 96 to 127. The default is 105.
Defines the SSE redundancy depth.
The value range is 1-6. The default is 3.
Defines the maximum payload size for V.150.1 SPRT Transport
Channel 0.
The range is 140 to 256. The default is 140.
Defines the maximum payload size for V.150.1 SPRT Transport
Channel 2.
The range is 132 to 256. The default is 132.
Defines the maximum window size of SPRT transport channel 2.
The value range is 8 to 32. The default is 8.
Defines the maximum payload size for V.150.1 SPRT Transport
Channel 3.
The range is 140 to 256. The default is 140.
Table 67-42: DTMF and Hook-Flash Parameters
67. Configuration Parameters Reference
Description
Description
867 Mediant 800B MSBR