Cli: Src-Host-Prefix; Cli: Dst-Host-Prefix; Web: Dest. Phone Prefix; For Example, [100-199](100,101,105) Denotes A Number That - AudioCodes Mediant 800B MSBR User Manual

Mediant 800B MSBR
Parameter
Web: Source Host Prefix

CLI: src-host-prefix

[PstnPrefix_SrcHostPrefix]

Web: Dest. Phone Prefix

CLI: dst-host-prefix

[PstnPrefix_DestHostPrefix]
Web: Source Phone Prefix
CLI: src-phone-prefix
[PstnPrefix_SourcePrefix]
Web: Source IP Address
CLI: src-ip-address
[PstnPrefix_SourceAddress]
Web: Source SRD ID
CLI: src-srd-id
Version 6.8
Defines the prefix of the URI host name in the From header of
the incoming SIP INVITE message.
By default, no value is defined (i.e., not used in routing rule). To
denote any prefix, use the asterisk (*) wildcard.
Note: If the P-Asserted-Identity header is present in the
incoming INVITE message, the value of this parameter is
compared to the P-Asserted-Identity URI host name (and not
the From header).
Defines the prefix or suffix of the called (destined) telephone
number. You can use special notations for denoting the prefix.

For example, [100-199](100,101,105) denotes a number that

starts with 100 to 199 and ends with 100, 101 or 105. To
denote any prefix, use the asterisk (*) symbol or to denote calls
without a called number, use the $ sign. For a description of
available notations, see ''Dialing Plan Notation for Routing and
Manipulation Tables'' on page 761.
The prefix can include up to 49 digits.
Defines the prefix or suffix of the calling (source) telephone
number.
The prefix can include up to 49 digits. You can use special
notations for denoting the prefix. For example, [100-
199](100,101,105) denotes a number that starts with 100 to
199 and ends with 100, 101 or 105. To denote any prefix, use
the asterisk (*) symbol. To denote calls without a calling
number, use the $ sign. For a description of available notations,
see ''Dialing Plan Notation for Routing and Manipulation
Tables'' on page 761.
Note: If the P-Asserted-Identity header is present in the
incoming INVITE message, the value of this parameter is
compared to the P-Asserted-Identity URI host name (and not
the From header).
Defines the source IP address of the incoming IP call that can
be used for routing decisions.
The IP address can be configured in dotted-decimal notation
(e.g., 10.8.8.5) or as an FQDN. If the address is an FQDN,
DNS resolution is done according to the DNSQueryType
parameter.
Notes:

The source IP address is obtained from the Contact header
in the INVITE message.

You can configure from where the source IP address is
obtained, using the SourceIPAddressInput parameter.

The source IP address can include the following wildcards:

"x": denotes single digits. For example, 10.8.8.xx
represents all the addresses between 10.8.8.10 and
10.8.8.99.

"*": denotes any number between 0 and 255. For
example, 10.8.8.* represents all addresses between
10.8.8.0 and 10.8.8.255.
Defines the SRD from where the incoming packet is received.
Note: When the incoming INVITE matches the SRD in the
409
Description
Mediant 800B MSBR
28. Routing