AudioCodes Mediant 800B MSBR User Manual page 88

For detailed descriptions of the SNMP parameters, see ''SNMP Parameters'' on page 768.

To configure SNMP community strings:
1. Open the SNMP Community String page (Configuration tab > System menu >
Management > SNMP > SNMP Community String).
2. Configure SNMP community strings according to the table below.
3. Click Submit, and then save ("burn") your settings to flash memory.
To delete a community string, select the Delete check box corresponding to the community
string that you want to delete, and then click Submit.
Table 10-1: SNMP Community String Parameter Descriptions
Parameter
Community String
Trap Community String
CLI: configure system > snmp
trap > community-string
[SNMPTrapCommunityString]
User's Manual
Figure 10-1: SNMP Community String Page

Read Only [SNMPReadOnlyCommunityString_x]: Up to five
read-only community strings (up to 19 characters each). The
default string is 'public'.

Read / Write [SNMPReadWriteCommunityString_x]: Up to
five read / write community strings (up to 19 characters each).
The default string is 'private'.
Community string used in traps (up to 19 characters).
The default string is 'trapuser'.
88
Mediant 800B MSBR
Description
Document #: LTRT-12813