AudioCodes Mediant 800B MSBR User Manual page 616

4. Click Submit.
5. To save the changes to flash memory, see ''Saving Configuration'' on page 592.
To register a user, select the user's table entry, and then from the Action button's drop-
down list , choose Register. To un-register a user, select the user, and then from the
Action button's drop-down list , choose Un-Register.
Table 46-2: GW User Info Table Parameter Descriptions
Parameter
Index
[GWUserInfoTable_Index]
PBX Extension
[GWUserInfoTable_PBXExtension]
Global Phone Number
[GWUserInfoTable_GlobalPhoneNumber]
Display Name
[GWUserInfoTable_DisplayName]
Username
[GWUserInfoTable_Username]
Password
[GWUserInfoTable_Password]
Status
46.1.5.2.2 Configuring GW User Info Table in CLI
The GW User Info table can be configured in the CLI using the following commands:

To add and/or modify a user (example):
# configure voip
(config-voip)# sip-definition proxy-and-registration
(sip-def-proxy-and-reg)# user-info gw-user-info <index, e.g.,
1>
(gw-user-info-1)# username JohnDee
(gw-user-info-1)# <activate | exit>

To delete a specific user, use the no command:
(sip-def-proxy-and-reg)# no user-info gw-user-info <index,
e.g., 1>

To view all table entries:
(sip-def-proxy-and-reg)# user-info gw-user-info display
---- gw-user-info-0 ----
pbx-ext (405)
global-phone-num (405)
display-name (Ext405)
username (user405)
password (0aGzoKfh5uI=)
status (not-resgistered)
User's Manual
Description
Defines an index for the new table record.
Defines the PBX extension number.
The valid value is a string of up to 10 characters.
Defines the "global" phone number for the IP side.
The valid value is a string of up to 20 characters.
Defines the Caller ID of the PBX extension.
The valid value is a string of up to 30 characters.
Defines the username for registering the user when
authentication is necessary.
The valid value is a string of up to 40 characters.
Defines the password for registering the user when
authentication is necessary.
The valid value is a string of up to 20 characters.
(Read-only field) Displays the status of the user -
"Registered" or "Not Registered".
616
Mediant 800B MSBR
Document #: LTRT-12813