AudioCodes Mediant 800B MSBR User Manual page 371

Mediant 800B MSBR
Parameter
Gateway Name
CLI: gateway-name
[TrunkGroupSettings_GatewayNam
e]
Contact User
CLI: contact-user
[TrunkGroupSettings_ContactUser]
Trunk Group Name
CLI: trunk-group-name
[TrunkGroupSettings_TrunkGroupN
ame]
Version 6.8
Defines the host name for the SIP From header in INVITE
messages and for the From/To headers in REGISTER
requests.
Note: If this parameter is not configured, the global
parameter, SIPGatewayName is used.
Defines the user part for the SIP Contact URI in INVITE
messages and for the From, To, and Contact headers in
REGISTER requests.
Notes:

This parameter is applicable only if the 'Registration
Mode' parameter is set to 'Per Account' and registration
through the Account table is successful.

If registration fails, the user part in the INVITE Contact
header is set to the source party number.

The 'Contact User' parameter in the Account table
overrides this parameter (see ''Configuring Registration
Accounts'' on page 291).
Defines a name for the Trunk Group. This name represents
the Trunk Group in the SIP 'tgrp' parameter of the outgoing
INVITE messages (according to RFC 4904). For example:
sip:+16305550100;tgrp=TG-1;trunk-
context=+1-630@isp.example.net;user=phone
The valid value can be a string of up to 20 characters. By
default, no name is configured.
Notes:

If this parameter is not configured, the Trunk Group
decimal number is used in the SIP 'tgrp' parameter.

This feature is enabled by any of the following
parameters:

UseSIPtgrp

UseBroadsoftDTG

Currently, this parameter can only be configured using
the ini file.
371
26. Trunk Group
Description
Mediant 800B MSBR