AudioCodes Mediant 800B MSBR User Manual page 333

User's Manual
Parameter
Web: Fax Behavior
CLI: sbc-fax-behavior
[IpProfile_SBCFaxBehavior]
Web: Fax Offer Mode
CLI: sbc-fax-offer-mode
[IpProfile_SBCFaxOfferMode]
Web: Fax Answer Mode
CLI: sbc-fax-answer-mode
[IpProfile_SBCFaxAnswerMode]
Web: PRACK Mode
CLI: sbc-prack-mode
[IpProfile_SbcPrackMode]
Version 6.8
than [0].
Defines the fax-offer negotiation method for this SIP entity.

[0] As Is = (Default) Pass fax transparently, without
interference.

[1] Handle always = Handle fax according to fax
settings in the IP Profile for all offer-answer
transactions (including the initial INVITE).

[2] Handle on re-INVITE = Handle fax according to fax
settings in the IP Profile for all re-INVITE offer-answer
transactions (except for initial INVITE).
Note: The fax settings in the IP Profile include
IpProfile_SBCFaxCodersGroupID,
IpProfile_SBCFaxOfferMode, and
IpProfile_SBCFaxAnswerMode.
Defines the coders included in the outgoing SDP offer
(sent to the called "fax") for this SIP entity.

[0] All coders = (Default) Use only (and all) the coders
of the selected Coders Group ID configured using the
SBCFaxCodersGroupID parameter.

[1] Single coder = Use only one coder. If a coder in the
incoming offer (from the calling "fax") matches a coder
in the SBCFaxCodersGroupID, then the device uses
this coder. If no match exists, then the device uses the
first coder listed in the Coders Group ID
(SBCFaxCodersGroupID).
Note: The parameter is applicable only if you set the
IpProfile_SBCFaxBehavior parameter to a value other
than [0].
Defines the coders included in the outgoing SDP answer
(sent to the calling "fax") for this SIP entity.

[0] All coders = Use matched coders between the
incoming offer coders (from the calling "fax") and the
coders of the selected Coders Group ID (configured
using the SBCFaxCodersGroupID parameter).

[1] Single coder = (Default) Use only one coder. If the
incoming answer (from the called "fax") includes a
coder that matches a coder match between the
incoming offer coders (from the calling "fax") and the
coders of the selected Coders Group ID
(SBCFaxCodersGroupID, then the device uses this
coder. If no match exists, the device uses the first listed
coder of the matched coders between the incoming
offer coders (from the calling "fax") and the coders of
the selected Coders Group ID.
Note: The parameter is applicable only if you set the
IpProfile_SBCFaxBehavior parameter to a value other
than [0].
Defines the device's handling of SIP PRACK messages
for this SIP entity.

[1] Optional = PRACK is optional. If required, the
device performs the PRACK process on behalf of the
333
23. Coders and Profiles
Description
Mediant 800B MSBR