AudioCodes Mediant 800B MSBR User Manual page 813

Mediant 800B MSBR
Parameter
Proxy IP Table
Web: Proxy IP Table
EMS: Proxy IP
CLI: configure voip > voip-network
proxy-ip
[ProxyIP]
Proxy Set Table
Web: Proxy Set Table
EMS: Proxy Set
CLI: configure voip > voip-network
proxy-set
[ProxySet]
Registrar Parameters
Web: Enable Registration
EMS: Is Register Needed
CLI: enable-registration
[IsRegisterNeeded]
Version 6.8

[1] INVITE Only = Challenges issued for INVITE requests
are cached. This prevents a mixture of REGISTER and
INVITE authorizations.

[2] Full = Caches all challenges from the proxies.
Notes:

This parameter is applicable only to the Gateway
application.

Challenge Caching is used with all proxies and not only with
the active one.
This table parameter defines the Proxy Set table with Proxy
Set IDs, each with up to 10 Proxy server IP addresses (or
FQDN).
The format of the ini file table parameter is as follows:
[ProxyIP]
FORMAT ProxyIp_Index = ProxyIp_IpAddress,
ProxyIp_TransportType, ProxyIp_ProxySetId;
[\ProxyIP]
For a description of this table, see ''Configuring Proxy Sets'' on
page 282.
To configure the Proxy Set attributes (such as Proxy Load
Balancing) in the ini file, use the ProxySet parameter.
This table parameter defines the Proxy Set ID table. This
includes, for example, Proxy keep-alive and load balancing and
redundancy mechanisms.
The format of the ini file table parameter is as follows:
[ ProxySet ]
FORMAT ProxySet_Index = ProxySet_ProxyName,
ProxySet_EnableProxyKeepAlive,
ProxySet_ProxyKeepAliveTime,
ProxySet_ProxyLoadBalancingMethod,
ProxySet_IsProxyHotSwap, ProxySet_SRD,
ProxySet_ClassificationInput,
ProxySet_ProxyRedundancyMode,
ProxySet_DNSResolveMethod,
ProxySet_KeepAliveFailureResp;
[ \ProxySet ]
For a description of this table, see ''Configuring Proxy Sets'' on
page 282.
For configuring the IP addresses per Proxy Set in the ini file,
use the ProxyIP parameter.
Enables the device to register to a Proxy/Registrar server.

[0] Disable = (Default) The device doesn't register to
Proxy/Registrar server.

[1] Enable = The device registers to Proxy/Registrar server
when the device is powered up and at every user-defined
interval (configured by the parameter RegistrationTime).
813
67. Configuration Parameters Reference
Description
Mediant 800B MSBR