AudioCodes Mediant 800B MSBR User Manual page 441

Mediant 800B MSBR
Notes:
•
Three-way conferencing using an external conference server is supported only by
FXS interfaces.
•
Instead of using the flash-hook button to establish a three-way conference call,
you can dial a user-defined hook-flash code (e.g., "*1"), configured by the
HookFlashCode parameter.
•
Three-way conferencing is applicable only to FXS and BRI interfaces.
•
Three-way conferencing support for the BRI phones connected to the device
complies with ETS 300 185.
•
The device supports high definition, three-way conferencing using wideband
codecs (e.g., G.722 and AMR-WB). This allows conference participants to
experience wideband voice quality. Call conferences can also include narrowband
and wideband participants.
The following example demonstrates three-way conferencing using the device's local, on-
board conferencing feature. In this example, telephone "A" connected to the device
establishes a three-way conference call with two remote IP phones, "B" and "C":
1. A establishes a regular call with B.
2. A places B on hold, by pressing the telephone's flash-hook button and the number "1"
key.
3. A hears a dial tone and then makes a call to C.
4. C answers the call.
5. A establishes a three-way conference call with B and C, by pressing the flash-hook
button and the number "3" key.
To configure local, on-board three-way conferencing:
1. Open the Supplementary Services page.
2. Set 'Enable 3-Way Conference' to Enable (Enable3WayConference = 1).
3. Set '3-Way Conference Mode' to On Board (3WayConferenceMode = 2).
4. Set
(FlashKeysSequenceStyle = 1 or 2).
Version 6.8
'Flash Keys Sequence
30. Configuring Supplementary Services
Style' to Sequence
441
1 or Sequence
Mediant 800B MSBR
2