AudioCodes Mediant 800B MSBR User Manual page 541

Mediant 800B MSBR
Parameter
CLI: limit-type
[SBCAdmissionControl_LimitType]
IP Group ID
CLI: ip-group-id
[SBCAdmissionControl_IPGroupID]
SRD ID
CLI: srd-id
[SBCAdmissionControl_SRDID]
Request Type
CLI: request-type
[SBCAdmissionControl_RequestType]
Request Direction
CLI: request-direction
[SBCAdmissionControl_RequestDirection]
Limit
CLI: limit
[SBCAdmissionControl_Limit]
Limit Per User
CLI: limit-per-user
[SBCAdmissionControl_LimitPerUser]
Version 6.8
35. Configuring Admission Control

[0] IP Group (default)

[1] SRD
Defines the IP Group to which you want to
apply the rule.
The default value is -1 (i.e., all IP Groups).
Note: This parameter is applicable only if
'Limit Type' is set to IP Group.
Defines the SRD to which you want to apply
the rule.
The default value is -1 (i.e., all SRDs).
Note: This parameter is applicable only if
'Limit Type' is set to SRD.
Defines the SIP dialog-initiating request type
to which you want to apply the rule (not the
subsequent requests that can be of different
type and direction).

[0] All = (Default) Includes the total number
of all dialogs.

[1] INVITE

[2] SUBSCRIBE

[3] Other
Defines the direction of the SIP request to
which the rule applies.

[0] Both = (Default) Rule applies to inbound
and outbound SIP dialogs.

[1] Inbound = Rule applies only to inbound
SIP dialogs.

[2] Outbound = Rule applies only to
outbound SIP dialogs.
Defines the maximum number of concurrent
SIP dialogs per IP Group or SRD. You can
also use the following special values:

[0] 0 = Block all these dialogs.

[-1] -1 = (Default) Unlimited.
Defines the maximum number of concurrent
SIP dialogs per user belonging to the specified
IP Group or SRD. You can also use the
following special values:

[0] 0 = Block all these dialogs.

[-1] -1 = (Default) Unlimited.
541
Description
Mediant 800B MSBR