To configure IP network interfaces:
1.
Open the Interface Table page (Configuration tab > VoIP menu > Network > IP
Interfaces Table).
2.
Click Add; a dialog box appears.
3.
Configure the IP network interface according to the parameters described in the table
below.
4.
Click Submit.
To view configured network interfaces that are currently active, click the IP Interface
Status Table
680.
Parameter
Table parameters
Index
CLI: network-if
[InterfaceTable_Index]
Web: Application Type
EMS: Application Types
CLI: application-type
[InterfaceTable_ApplicationTy
pes]
User's Manual
button. For more information, see ''Viewing Active IP Interfaces'' on page
Table 16-2: Interface Table Parameters Description
Table index row of the interface.
The range is 0 to 11.
Defines the applications allowed on the interface.
[0] OAMP = Operations, Administration, Maintenance and
Provisioning (OAMP) applications (e.g., Web, Telnet, SSH, and
SNMP).
[1] Media = Media (i.e., RTP streams of voice).
[2] Control = Call Control applications (e.g., SIP).
[3] OAMP + Media = OAMP and Media applications.
[4] OAMP + Control = OAMP and Call Control applications.
[5] Media + Control = Media and Call Control applications.
[6] OAMP + Media + Control = All application types are allowed
on the interface.
Description
132
Mediant 800B MSBR
Document #: LTRT-12813