Https Parameters - AudioCodes Mediant 800B MSBR User Manual

Parameter
Timeout To Relatch SRTP
[TimeoutToRelatchSRTPMsec]
Timeout To Relatch Silence
[TimeoutToRelatchSilenceMsec]
Timeout To Relatch RTCP
[TimeoutToRelatchRTCPMsec]
Fax Relay Rx/Tx Timeout
[FaxRelayTimeoutSec]

67.4.2 HTTPS Parameters

The Secure Hypertext Transport Protocol (HTTPS) parameters are described in the table
below.
Parameter
Web: Secured Web Connection
(HTTPS)
EMS: HTTPS Only
CLI: secured-connection
[HTTPSOnly]
EMS: HTTPS Port
CLI: https-port
[HTTPSPort]
Web/EMS: HTTPS Cipher String
CLI: https-cipher-string
[HTTPSCipherString]
User's Manual
another stream.
The valid range is any value from 0. The default is 200.
Defines a period (msec) during which if no packets are received
from the current SRTP session, the channel can re-latch onto
another stream.
The valid range is any value from 0. The default is 200.
Defines a period (msec) during which if no packets are received
from the current RTP/SRTP session and the channel is in silence
mode, the channel can re-latch onto another stream.
The valid range is any value from 0. The default is 200.
Defines a period (msec) during which if no packets are received
from the current RTCP session, the channel can re-latch onto
another RTCP stream.
The valid range is any value from 0. The default is 10,000.
Defines a period (sec) during which if no T.38 packets are received
or sent from the current T.38 fax relay session, the channel can re-
latch onto another stream.
The valid range is 0 to 255. The default is 10.
Table 67-25: HTTPS Parameters
Determines the protocol used to access the Web interface.

[0] HTTP and HTTPS (default).

[1] HTTPs Only = Unencrypted HTTP packets are blocked.
Note: For this parameter to take effect, a device reset is
required.
Defines the local Secured HTTPS port of the device. This
parameter allows secure remote device Web management from
the LAN. To enable secure Web management from the LAN,
configure the desired port.
The valid range is 1 to 65535 (other restrictions may apply within
this range). The default port is 443.
Note: For this parameter to take effect, a device reset is
required.
Defines the Cipher string for HTTPS (in OpenSSL cipher list
format). For the valid range values, refer to URL
http://www.openssl.org/docs/apps/ciphers.html.
The default is 'RC4:EXP' (Export encryption algorithms). For
example, use 'ALL' for all ciphers suites (e.g., for ARIA
encryption for TLS). The only ciphers available are RC4 and
DES, and the cipher bit strength is limited to 56 bits.
Notes:
796
Mediant 800B MSBR
Description
Description
Document #: LTRT-12813