AudioCodes Mediant 800B MSBR User Manual page 549

Mediant 800B MSBR
Parameter
Source Port
CLI: src-port
[Classification_SrcPort]
Source Transport Type
CLI: src-transport-type
[Classification_SrcTransportType]
Source Username Prefix
CLI: src-user-name-prefix
[Classification_SrcUsernamePrefix]
Source Host
CLI: src-host
[Classification_SrcHost]
Destination Username Prefix
CLI: dst-user-name-prefix
[Classification_DestUsernamePrefix]
Version 6.8
wildcards:

"x" wildcard: represents single digits. For example,
10.8.8.xx represents all the addresses between
10.8.8.10 to 10.8.8.99.

Asterisk (*) wildcard: represents any number between 0
and 255. For example, 10.8.8.* represents all addresses
between 10.8.8.0 and 10.8.8.255.
If this parameter is not configured or is configured as an
asterisk (*), any source IP address is accepted.
Defines the source port number of the incoming SIP dialog.
Defines the source transport type (UDP, TCP, or TLS) of
the incoming SIP dialog.

[-1] ANY (Default) = All transport types

[0] UDP

[1] TCP

[2] TLS
Defines the prefix of the source URI user part of the
incoming SIP dialog. The URI is typically located in the SIP
From header. However, you can configure the SIP header
from where the device obtains the source URI. This is done
in the IP Group table, using the 'Source URI Input'
parameter. For more information on how the device obtains
this URI, see ''SIP Dialog Initiation Process'' on page 502.
The default is the asterisk (*) symbol, which represents any
source username prefix. The prefix can be a single digit or a
range of digits. For available notations, see ''Dialing Plan
Notation for Routing and Manipulation'' on page 761.
Note: For REGISTER requests, the source URL is obtained
from the To header.
Defines the prefix of the source URI host name. The URI is
typically located in the SIP From header. However, you can
configure the SIP header from where the device obtains the
source URI. This is done in the IP Group table, using the
'Source URI Input' parameter. For more information on how
the device obtains this URI, see ''SIP Dialog Initiation
Process'' on page 502.
The default is the asterisk (*) symbol, which represents any
source host prefix.
Note: For REGISTER requests, the source URL is obtained
from the To header.
Defines the prefix of the destination Request-URI user part
of the incoming SIP dialog.
The default is the asterisk (*) symbol, which represents any
destination username. The prefix can be a single digit or a
range of digits. For available notations, see ''Dialing Plan
Notation for Routing and Manipulation'' on page 761.
549
37. Routing SBC
Description
Mediant 800B MSBR