AudioCodes Mediant 800B MSBR User Manual page 562

parameter, SBCAlternativeRoutingReasons or CLI command, configure voip > sbc routing
sbc-alt-routing-reasons.

To configure SIP reason codes for alternative IP routing:
1. Open the SBC Alternative Routing Reasons page (Configuration tab > VoIP menu >
SBC > Routing SBC > Alternative Routing Reasons).
2. Click Add; the following dialog box appears:
Figure 37-6: Alternative Routing Reasons Table - Add Record
3. Configure a SIP response code for alternative routing according to the parameters
described in the table below.
4. Click Submit, and then save ("burn") your settings to flash memory.
Table 37-4: SBC Alternative Routing Reasons Table Parameter Descriptions
Parameter
Index
[SBCAlternativeRoutingReasons_Index]
Release Cause
CLI: rel-cause
[SBCAlternativeRoutingReasons_ReleaseCause]
User's Manual
Description
Defines an index number for the new table
record.
Defines a SIP response code for triggering the
device's alternative routing mechanism.
562
Mediant 800B MSBR
Document #: LTRT-12813