AudioCodes Mediant 800B MSBR User Manual page 969

Mediant 800B MSBR
Parameter
[FaxReroutingDelay]
Call Forking Parameters
Web/EMS: Forking Handling Mode
CLI: forking-handling
[ForkingHandlingMode]
Web: Forking Timeout
CLI: forking-timeout
[ForkingTimeOut]
Version 6.8
67. Configuration Parameters Reference
message is sent to the PSTN. If the EnableComfortTone
parameter is set to 1, a comfort tone is played to the
PSTN. When the timeout expires, the device sends an
INVITE to a specific IP Group or to a fax server according
to the Outbound IP Routing table rules. This option is
applicable only to ISDN.
Note: This parameter has replaced the EnableFaxRerouting
parameter. For backward compatibility, the
EnableFaxRerouting parameter set to 1 is equivalent to the
FaxReroutingMode parameter set to 1.
Defines the maximum time interval (in seconds) that the
device waits for CNG detection before re-routing calls
identified as fax calls to fax destinations (terminating fax
machine).
The valid value range is 1-10. The default is 5.
Determines how the device handles the receipt of multiple
SIP 18x forking responses for Tel-to-IP calls. The forking
18x response is the response with a different SIP to-tag than
the previous 18x response. These responses are typically
generated (initiated) by Proxy / Application servers that
perform call forking, sending the device's originating INVITE
(received from SIP clients) to several destinations, using the
same Call ID.

[0] Parallel handling = (Default) If SIP 18x with SDP is
received, the device opens a voice stream according to
the received SDP and disregards any subsequently
received 18x forking responses (with or without SDP). If
the first response is 180 without SDP, the device
responds according to the PlayRBTone2TEL parameter
and disregards the subsequent forking 18x responses.

[1] Sequential handling = If 18x with SDP is received, the
device opens a voice stream according to the received
SDP. The device re-opens the stream according to
subsequently received 18x responses with SDP, or plays
a ringback tone if 180 response without SDP is received.
If the first received response is 180 without SDP, the
device responds according to the PlayRBTone2TEL
parameter and processes the subsequent 18x forking
responses.
Note: Regardless of this parameter setting, once a SIP 200
OK response is received, the device uses the RTP
information and re-opens the voice stream, if necessary.
Defines the timeout (in seconds) that is started after the first
SIP 2xx response has been received for a User Agent when
a Proxy server performs call forking (Proxy server forwards
the INVITE to multiple SIP User Agents). The device sends
a SIP ACK and BYE in response to any additional SIP 2xx
received from the Proxy within this timeout. Once this
timeout elapses, the device ignores any subsequent SIP
2xx.
The number of supported forking calls per channel is 20. In
969
Description
Mediant 800B MSBR