Names Of Each Part - Mitsubishi Electric QD75P1N User Manual

4 INSTALLATION, WIRING AND MAINTENANCE OF THE PRODUCT

4.1.2 Names of each part

QD75P4N
No.
1) RUN indicator LED, ERR indicator LED
2) Axis display LED (AX1 to AX4)
3) External device connector
Differential driver common terminal
4) (Differential driver output system (the
QD75D N/QD75D ) only)
5) Serial number plate
(1) The part names of the QD75 are described with the QD75P N/QD75D N as an
example. The QD75P N/QD75D N and QD75P /QD75D
indication of their model names and serial numbers
1)
2)
3)
5)
Name
Refer to the next page.
Connector for connection with the drive unit, mechanical
system input or manual pulse generator. (40-pin connector)
AX1: Axis 1, AX2: Axis 2, AX3: Axis 3, AX4: Axis 4
For details, refer to Section 3.4.2 "Signal layout for external
device connection connector".
Terminal connected to the differential receiver common of the
drive unit. For details, refer to Section 4.3.2 "Wiring of the
differential driver common terminal".
Indicates the serial number of the QD75
4 - 3
MELSEC-Q
are different in the
QD75D4N
1)
2)
3)
5)
4)
Details