Conductor Termination; Connecting Conductors To Cage Clamp - WAGO 750 Series Manual

Serie 750, 753

Conductor Termination

8
8.1 Conductor Termination
CAGE CLAMP
stranded and fine-stranded conductors.
Only one conductor may be connected to each clamping unit.
8.1.1 Connecting Conductors to CAGE CLAMP®
To connect the conductor, an operating tool must be used to open the CAGE CLAMP
To connect a conductor, proceed as follows:
ü You need an operating tool.
1. Insert the operating tool straight into the rectangular opening above the connection
to open the CAGE CLAMP
2. Insert the conductor into the corresponding connection opening (round housing
opening).
3. Remove the operating tool again to close CAGE CLAMP
ð The conductor is now securely clamped.
System manual | Version: 3.3.1
®
- and Push-in CAGE CLAMP
®
.
Conductor Termination
®
Connectors are designed for solid,
Figure 35: Connecting a Conductor to a CAGE CLAMP
®
.
®
.
®
53