WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR
4.1.2
Labeling
The front labeling includes:
-
Device designation
-
Name of the display elements, connections and control elements
-
Serial number with hardware and firmware version
The side labeling includes:
-
Manufacturer's identification
-
Connector pin assignment
-
Serial number
-
Approval information
4.1.2.1
Production Code
The serial number indicates the delivery status directly after production.
Figure 2: Marking Area for Serial Numbers
There are two serial numbers in two rows in the side marking. They are left of the
release tab. The first 10 positions in the longer row of the serial numbers contain
version and date identifications.
Example structure of the rows: 0114010101...
01
WW
Calendar
week
The row order can vary depending on the production year, only the longer row is
relevant. The back part of this and the shorter row contain internal administration
information from the manufacturer.
14
01
YY
FW --
Year
Firmware
Hardware
version
Version 1.7.0, valid from FW Version 04.01.10(23)
01
01
HW
FL
Firmware
version
loader
version
Properties
(additional positions)
-
Internal information
Manual
27