Labeling; Manufacturing Number; Figure 2: Marking Area For Serial Numbers - WAGO 750-8207 Manual

WAGO-I/O-SYSTEM 750
750-8207 PFC200 CS 2ETH RS 3G
3.2

Labeling

The front labeling includes:
- Device designation
- Name of the display elements, connections and control elements
- Serial number with hardware and firmware version
The side labeling includes:
- Manufacturer's identification
- Connector pin assignment
- Serial number
- Approval information
3.2.1

Manufacturing Number

The serial number indicates the delivery status directly after production.

Figure 2: Marking Area for Serial Numbers

There are two serial numbers in two rows in the side marking. They are left of the
release tab. The first 10 positions in the longer row of the serial numbers contain
version and date identifications.
Example structure of the rows: 0114010101...
01
WW
Calendar
week
The row order can vary depending on the production year, only the longer row is
relevant. The back part of this and the shorter row contain internal administration
information from the manufacturer.
Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)
14 01
YY FW --
Year Firmware Hardware
version
01 01
HW FL
Firmware
version loader
version
Device Description
(additional positions)
-
Internal information
Manual
29