Dynamic Host Configuration Protocol (Dhcp) Commands; Introduction - Allied Telesis AT-DC2552XS/L3 Command Reference Manual

48

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
DHCP.
For more information, see the
which is available at the above link on alliedtelesis.com.
For information on filtering and saving command output, see "Controlling "show"
Command Output" in the
and Configuration
alliedtelesis.com.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50079-01 REV A
Protocol (DHCP)
"Getting Started with AlliedWare Plus" Feature Overview
Guide. This guide is available at the above link on
"bootfile" on page 2439
"clear ip dhcp binding" on page 2440
"default-router" on page 2441
"dns-server" on page 2442
"domain-name" on page 2443
"host (DHCP)" on page 2444
"ip address dhcp" on page 2445
"ip dhcp bootp ignore" on page 2447
"ip dhcp leasequery enable" on page 2448
"ip dhcp option" on page 2449
"ip dhcp pool" on page 2451
"ip dhcp-relay agent-option" on page 2452
"ip dhcp-relay agent-option
"ip dhcp-relay agent-option
"ip dhcp-relay information
Command Reference for AT-DC2552XS/L3
AlliedWare Plus™ Operating System - Version 5.4.5-2.x
Dynamic Host
Configuration
Commands
DHCP Feature Overview and Configuration
checking" on page 2454
remote-id" on page 2455
policy" on page 2456
Guide,
2437