Dynamic Host Configuration Protocol (Dhcp) Commands; Introduction - Allied Telesis AT-x510-28GTX Command Reference Manual

53

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
DHCP.
For more information, see the
which is available at the above link on alliedtelesis.com.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
available at the above link on alliedtelesis.com.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50102-01 REV C
Protocol (DHCP)
"bootfile" on page 2217
"clear ip dhcp binding" on page 2218
"default-router" on page 2219
"dns-server" on page 2220
"domain-name" on page 2221
"host (DHCP)" on page 2222
"ip address dhcp" on page 2223
"ip dhcp bootp ignore" on page 2225
"ip dhcp leasequery enable" on page 2226
"ip dhcp option" on page 2227
"ip dhcp pool" on page 2229
"ip dhcp-relay agent-option" on page 2230
"ip dhcp-relay agent-option
"ip dhcp-relay agent-option
"ip dhcp-relay information
"ip dhcp-relay maxhops" on page 2236
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Dynamic Host
Configuration
Commands
DHCP Feature Overview and Configuration
checking" on page 2232
remote-id" on page 2233
policy" on page 2234
Guide,
"Getting Started
Guide. This guide is
2215