Dynamic Host Configuration Protocol (Dhcp) Commands; Introduction - Allied Telesis CentreCOM GS948MPX Command Reference Manual

38

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
DHCP.
For more information, see the
which is available at the above link on alliedtelesis.com.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
available at the above link on alliedtelesis.com.
Command List •
•
•
•
C613-50181-01 Rev B
Protocol (DHCP)
"ip address dhcp" on page 1517
"ip dhcp-client default-route
"show counter dhcp-client" on page 1521
"show dhcp lease" on page 1522
Command Reference for GS900MX Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Dynamic Host
Configuration
Commands
DHCP Feature Overview and Configuration
distance" on page 1519
Guide,
"Getting Started
Guide. This guide is
1516