Dynamic Host Configuration Protocol (Dhcp) Commands; Introduction - Allied Telesis AT-x930-28GTX Command Reference Manual

55

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
DHCP.
For more information, see the
which is available at the above link on alliedtelesis.com.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
available at the above link on alliedtelesis.com.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50100-01 REV C
Protocol (DHCP)
"bootfile" on page 2695
"clear ip dhcp binding" on page 2696
"default-router" on page 2697
"dns-server" on page 2698
"domain-name" on page 2699
"host (DHCP)" on page 2700
"ip address dhcp" on page 2701
"ip dhcp bootp ignore" on page 2703
"ip dhcp leasequery enable" on page 2704
"ip dhcp option" on page 2705
"ip dhcp pool" on page 2707
"ip dhcp-relay agent-option" on page 2708
"ip dhcp-relay agent-option
"ip dhcp-relay agent-option
"ip dhcp-relay information
"ip dhcp-relay maxhops" on page 2714
Command Reference for x930 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Dynamic Host
Configuration
Commands
DHCP Feature Overview and Configuration
checking" on page 2710
remote-id" on page 2711
policy" on page 2712
Guide,
"Getting Started
Guide. This guide is
2693