Dynamic Host Configuration Protocol (Dhcp) Commands; Introduction - Allied Telesis AT-x230-10GP User Manual

43

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
DHCP.
For more information, see the
which is available at the above link on alliedtelesis.com.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
available at the above link on alliedtelesis.com.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
C613-50104-01 REV A
Protocol (DHCP)
"ip address dhcp" on page 1551
"ip dhcp-relay agent-option" on page 1553
"ip dhcp-relay agent-option
"ip dhcp-relay agent-option
"ip dhcp-relay information
"ip dhcp-relay maxhops" on page 1559
"ip dhcp-relay max-message-length" on page 1560
"ip dhcp-relay server-address" on page 1562
"service dhcp-relay" on page 1564
"show counter dhcp-client" on page 1565
"show counter dhcp-relay" on page 1566
"show dhcp lease" on page 1569
"show ip dhcp-relay" on page 1571
Command Reference for x230 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Dynamic Host
Configuration
Commands
DHCP Feature Overview and Configuration
checking" on page 1555
remote-id" on page 1556
policy" on page 1557
Guide,
"Getting Started
Guide. This guide is
1550