Component List - Mitsubishi Electric MELSEC-Q Series User Manual

2.2 Component list

No. Part name
Simple Motion
1
module
2 Personal computer
3 RS-232 cable
4 USB cable
5 Ethernet cable
6 Servo amplifier
7 I/O device
Manual pulse
8
generator
CC-Link IE Field
9
(Note-1)
Network cable
External input signal
10
(Note-2)
cable
(Note-1)
11 Hub
(Note-1): Refer to the "MELSEC-Q QD77GF Simple Motion Module User's Manual (Network)" for details of cables and hubs.
(Note-2): The external input wiring connector has been prepared.
[External input wiring connector]
Part name
Applicable connector
Applicable wire size
(Note-3): AWG24 (0.2mm
The positioning system using the QD77GF is configured of the following devices.
Type
QD77GF4
QD77GF
QD77GF8
QD77GF16
Personal
computer which (Prepared by user)
supports Refer to the "GX Works2 Version1 Operating Manual (Common)" for details.
Windows R
(Prepared by user)
An RS-232 cable is needed for connecting the CPU module with a personal
QC30R2
computer.
Refer to the "GX Works2 Version1 Operating Manual (Common)" for details.
(Prepared by user)
A USB cable is needed for connecting the CPU module with a personal
–
computer.
Refer to the "GX Works2 Version1 Operating Manual (Common)" for details.
(Prepared by user)
An Ethernet cable is needed for connecting the CPU module with a personal
–
computer. Refer to the "GX Works2 Version1 Operating Manual (Common)"
for details.
(Prepared by user)
–
(Prepared by user)
–
(Prepared by user)
Recommended: MR-HDP01 (Manufactured by Mitsubishi Electric
–
Corporation)
(Prepared by user)
An Ethernet cable is needed for connecting the Simple Motion module with a
–
servo amplifier and an I/O device.
(Prepared by user)
Cables are needed for connecting the Simple Motion module with an external
–
device.
(Prepared by user)
Switching hubs are needed for connecting the Simple Motion module with a
–
servo amplifier and an I/O device in star topology.
Recommended: DT135TX (Mitsubishi Electric System & Service Co., Ltd.)
LD77MHIOCON
AWG30 to AWG24 (0.05 to 0.2mm
2
) is recommended.
Remarks
Number of control axes
GF: CC-Link IE Field Network
Specification
(Note-3)
2 )
2 - 3
Chapter 2 System Configuration