Table of Contents
Advertisement
M16C/62P Group (M16C/62P, M16C/62PT)
12.2 Software Interrupts
A software interrupt occurs when executing certain instructions. Software interrupts are non-maskable
interrupts.
12.2.1 Undefined Instruction Interrupt
An undefined instruction interrupt occurs when executing the UND instruction.
12.2.2 Overflow Interrupt
An overflow interrupt occurs when executing the INTO instruction with the O flag set to "1" (the operation
resulted in an overflow). The following are instructions whose O flag changes by arithmetic:
ABS, ADC, ADCF, ADD, CMP, DIV, DIVU, DIVX, NEG, RMPA, SBB, SHA, SUB
12.2.3 BRK Interrupt
A BRK interrupt occurs when executing the BRK instruction.
12.2.4 INT Instruction Interrupt
An INT instruction interrupt occurs when executing the INT instruction. Software interrupt Nos. 0 to 63 can
be specified for the INT instruction. Because software interrupt Nos. 4 to 31 are assigned to peripheral
function interrupts, the same interrupt routine as for peripheral function interrupts can be executed by
executing the INT instruction.
In software interrupt Nos. 0 to 31, the U flag is saved to the stack during instruction execution and is
cleared to "0" (ISP selected) before executing an interrupt sequence. The U flag is restored from the
stack when returning from the interrupt routine. In software interrupt Nos. 32 to 63, the U flag does not
change state during instruction execution, and the SP then selected is used.
R
e
. v
2
3 .
0
S
e
p
0
, 1
2
0
0
4
R
E
J
0
9
B
0
1
8
5
0 -
2
3
0
Z
f o
3
6
4
page 90
12. Interrupt
Advertisement
Table of Contents
