2.1
Input check (Test mode 03)
The status of each input signal can be checked by pressing the [FAX] button, [COPY] button,
[SCAN] button and the digital keys in the test mode (03).
<Operation procedure>
[0][3]
[START]
[POWER]
Note:
Initialization is performed before the equipment enters the test mode.
Items to be checked and the condition of the equipment when the buttons [A] to [H] are highlighted are
listed in the following pages.
e-STUDIO5520C/6520C/6530C
SELF-DIAGNOSTIC MODE
[FAX]
[Digital keys]
[COPY]
or
[SCAN]
[CLEAR]
Fig. 2-2 Example of display during input check
2 - 4
(LCD ON)
[POWER] OFF/ON
© 2008-2011 TOSHIBA TEC CORPORATION All rights reserved
(Exit)