Input Check (Test Mode 03) (E-Studio200L/230/230L/280) - Toshiba e-studio200l Service Handbook

2.2.1

Input check (Test mode 03) (e-STUDIO200L/230/230L/280)

The status of each input signal can be checked by pressing the [FAX] button, and the digital keys in
the test mode (03).
<Operation procedure>
[0][3]
[START]
[POWER]
Note: Note:
Initialization is performed before the equipment enters the test mode.
Items to be checked and the condition of the equipment when the buttons [A] to [H] are highlighted are
listed in the following pages.
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
[FAX] [Digital keys]
[CLEAR]
Fig. 2-2 Example of display during input check
2 - 25
10/06
(LCD ON) [POWER] OFF/ON
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
ERROR CODE AND SELF-DIAGNOSTIC MODE
(Exit)
2