1.
FEATURE
1.1
Main Feature of this equipment
•
Downsizing of equipment (equivalent to black equipment)
Its external dimensions are almost same as those of black equipment, even though it is full-color
equipment.
•
Pursuing usability
Maintenance work such as the replacement of supplies can be done more easily and efficiently.
A new automatic paper size detection mechanism for drawers is adopted.
•
Improving serviceability
Developer material is pre-filled in each developer unit.
Efficiency of serviceability such as the replacement of supplies is improved.
•
Adopting of LED for a new exposure lamp to scan originals
An LED provides a stable amount of light immediately after emission, and has a longer life
comparing to a cold-cathode tube.
No inverter board is required, resulting the reduction of parts.
•
Adopting of new exposure LED print head
It does not require rotating parts such as motors while the existing lasers do, realizing reduction in
size and weight, and also vibration.
•
An IC chip is mounted to the toner cartridge
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO2555C/3055C/3555C/4555C/5055C
1 - 1
1
FEATURE