Input Check (Test Mode 03); Example Of Display During Input Check - Toshiba e-STUDIO477S Service Manual

3.3

Input check (Test mode 03)

The status of each input signal can be checked by pressing the [FAX] button, [COPY] button,
[SCAN] button and the digital keys in the test mode (03).
<Operation procedure>
[0][3]
[START]
[POWER]
[CLEAR]
Notes:
• Initialization is performed before the equipment enters the test mode.
• The PRINT DATA lamp blinks when the input check is running.
Refer to "11. SELF-DIAGNOSTIC MODE" in this manual for the items to be checked and the condition
of the equipment when the buttons [A] to [H] are highlighted.
e-STUDIO477S/527S/477SL
SELF-DIAGNOSTIC MODE
[FAX]
[COPY]
[Digital keys]
or
[SCAN]
[CLEAR]
Fig. 3-5 Example of display during input check
3 - 8
(LCD ON) [POWER] OFF/ON
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
(Exit)