Input Check (Test Mode 03) - Toshiba e-STUDIO556 Service Manual

5.3

Input check (Test mode 03)

The status of each input signal can be checked by pressing the [FAX] button, [COPY] button and
the digital keys in the test mode (03).
<Operation procedure>
[0][3]
[START]
[POWER]
[CLEAR]
Note:
Initialization is performed before the equipment enters the test mode.
Refer to "Appendix" in this manual for the items to be checked and the condition of the equipment when
the buttons [A] to [H] are highlighted.
© 2012 TOSHIBA TEC CORPORATION All rights reserved
[FAX]
[Digital keys]
[COPY]
or
[SCAN]
[CLEAR]
Fig. 5-5 Example of display during input check
5 - 7
(LCD ON) [POWER] OFF/ON
(Exit)
e-STUDIO556/656/756/856(Ver03)
SELF-DIAGNOSTIC MODE
5