2.2
Input Check (Test Mode 03)
The status of each input signal can be checked by pressing the [FAX] button, and the digital keys in the
test mode (03).
Operation procedure
[0][3]
[START]
[FAX]
[Digital keys]
(LCD ON)
[POWER] OFF/ON
[POWER]
or
(Exit)
[COPY]
[CLEAR]
Note:
Initialization is performed before the equipment enters the test mode.
Fig. 2-2 Example of display during input check
Items to be checked and the condition of the equipment when the buttons [A] to [H] are highlighted are
listed in the following pages.
e-STUDIO205L/255/305/355/455
© 2009 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSIS MODES
2 - 4