Toshiba e-STUDIO 2555C Service Manual page 39

Notes:
• The bridge kit (KN-2550) is necessary for installation of the finisher (MJ-1107/C or MJ-1108/
C).
• The finisher (MJ-1036-N/C-N) can be installed to 25ppm/30ppm/35ppm only.
• The finisher (MJ-1036-N/C-N) is necessary for installation of the hole punch unit (MJ-6007N/
E/F/S/E-C).
• The finisher (MJ-1107/C or MJ-1108/C) is necessary for installation of the hole punch unit
(MJ-6104N/E/F/S/E-C).
• The antenna (GN-3010) is necessary to enable the wireless LAN module (GN-1060/C).
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2555C/3055C/3555C/4555C/5055C
SPECIFICATIONS/ACCESSORIES/OPTIONS/SUPPLIES
2 - 15
2