Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1852

Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The server type may be RADIUS, TACACS+, LDAP, ACE/Server, or the local user database. Up to 4
servers may be configured for an interface type; at least one is required. Each server name should be
separated by a space.
•
The switch uses only the first available server in the list to check for user information. For example, if
server1 is not available, the switch will poll server2. If user information is not found on the first avail-
able server, the authentication request will fail.
•
RADIUS, TACACS+, and LDAP servers may each have an additional backup specified through the
aaa radius-server,
•
If the local switch database will be used as the only authentication server, specify local for server1. If
local is specified as a backup server, it should be entered last in the list of servers. The local user data-
base is always available if the switch is up.
•
Only LDAP or the local database may be used for authenticated SNMP management.
•
An ACE/Server cannot be specified for SNMP access.
•
If Secure Shell (ssh) is enabled, Telnet and FTP should be disabled.
Examples
-> aaa authentication telnet pubs1
-> no aaa authentication telnet
-> aaa authentication default pubs2 pubs3
Release History
Release 6.6.1; command was introduced.
Related Commands
aaa radius-server
aaa ldap-server
user
show aaa server
page 43-12
aaa tacacs+-server, and
Configures or modifies a RADIUS server for Authenticated Switch
Access.
Configures or modifies an LDAP server for Authenticated Switch
Access.
Configures user information for the local database on the switch.
Displays information about servers configured for Authenticated Switch
Access.
aaa ldap-server commands.
OmniSwitch 6250 CLI Reference Guide
AAA Commands
November 2009