Aaa Ldap-Server - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

AAA Commands

aaa ldap-server

Configures or modifies an LDAP server for Authenticated Switch Access.
aaa ldap-server server_name [host {hostname | ip_address} [{hostname2 | ip_address2}]] [dn dn_name]
[password super_password] [base search_base] [retransmit retries] [timeout seconds] [ssl | no ssl]
[port port]
no aaa ldap-server server-name
Syntax Definitions
server_name
hostname
ip_address
hostname2
ip_address2
dn_name
super_password
search_base
retries
seconds
ssl
no ssl
port
OmniSwitch 6250 CLI Reference Guide
The name of the LDAP server.
The host name (DNS) of the primary LDAP server. The host name or IP
address is required when creating a new server.
The IP address of the primary LDAP server.
The host name (DNS) of the backup LDAP server.
The IP address of a backup host for the LDAP server.
The super-user or administrative distinguished name in the format
recognized by the LDAP-enabled directory servers. For example:
cn=manager. Must be different from the search-base name and must be
in a format supported by the server. Required when creating a new
server.
The super-user password recognized by the LDAP-enabled directory
servers. The password may be clear text or hexadecimal format.
Required when creating a new server.
The search base recognized by the LDAP-enabled directory servers. For
example, o=company or c=country. Must be different from the
dn_name. Required when creating a new server.
The number of retries the switch makes to the LDAP server to authenti-
cate a user before trying the backup server.
The timeout in seconds for server replies to authentication requests from
the switch.
Enables a secure switch layer (SSL) between the switch and the LDAP
server.
Disables a secure switch layer (SSL) between the switch and the LDAP
server.
The port number for the primary LDAP server and any backup server.
Must match the port number configured on the server.
November 2009 page 43-7