Show Vlan Ipmvlan Port-Binding - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

IP Multicast VLAN Commands

show vlan ipmvlan port-binding

Displays the translation bindings of an IP Multicast VLAN on a port, an aggregate of ports, or all the
ports.
show vlan ipmvlan port-binding [slot/port | agg_num]
Syntax Definitions
slot/port
agg_num
Defaults
By default all the IPMVLANs will be displayed.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Use the slot/port or agg_num parameter with this command to view the IPMVLANs associated with a
specific port or an aggregate of ports.
Examples
-> show vlan ipmvlan port-binding
port ipmvlan
+---------+-----------+----------+-------------+
2/2 100
2/2 100
0/2 51
-> show vlan ipmvlan port-binding 2/2
ipmvlan cvlan
+---------+-----------+------------+
100 10
100 11
-> show vlan ipmvlan port-binding 2
ipmvlan cvlan
+---------+-----------+------------+
51 151
output definitions
port
ipmvlan
OmniSwitch 6250 CLI Reference Guide
The slot number for the module and physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
The Link aggregate ID number. The valid range is 0–31.
cvlan type
10 receiver
11 receiver
151 receiver
type
receiver
receiver
type
receiver
The slot number/physical port number on that module.
The numerical IPMVLAN ID.
November 2009 page 42-21