Show Ip Multicast - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

IP Multicast Switching Commands

show ip multicast

Displays the IP Multicast Switching and Routing status and the general configuration parameters on the
specified VLAN or on the system if no VLAN is specified.
show ip multicast [vlan vid]
Syntax Definitions
vid
Defaults
By default the status and general configuration parameters for the system.
Platforms Supported
OmniSwitch 6250
Usage Guidelines
Specify a VLAN ID to display the configuration information for an individual VLAN.
Examples
-> show ip multicast
Status:
Querying:
Proxying
Spoofing:
Zapping:
Querier Forwarding:
Version:
Robustness:
Query Interval (seconds):
Query Response Interval (tenths of seconds):
Last Member Query Interval(tenths of seconds):10
Unsolicited Report Interval(seconds):
Router Timeout (seconds):
Source Timeout (seconds):
OmniSwitch 6250 CLI Reference Guide
VLAN ID number (1–4094).
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
2
2
125
100
1
90
30
November 2009 page 41-71