Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1790

-> show ip multicast vlan 1
Status:
Querying:
Proxying
Spoofing:
Zapping:
Querier Forwarding:
Version:
Robustness:
Query Interval (seconds):
Query Response Interval (tenths of seconds):
Last Member Query Interval(tenths of seconds):10
Unsolicited Report Interval(seconds):
Router Timeout (seconds):
Source Timeout (seconds):
Output fields are described here:
output definitions
Status
Querying
Proxying
Spoofing
Zapping
Querier Forwarding
Version
Robustness
page 41-72
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
2
2
125
100
1
90
30
Whether the IP Multicast Switching and Routing is Enabled or Dis-
abled (the default status).You can enable or disable IP Multicast
Switching and Routing with the
described on page 41-3.
The current state of IGMP querying, which can be Enabled or Dis-
abled (the default status). You can enable or disable IGMP querying
with the ip multicast querying
41-27.
The current state of IGMP proxying on the system, which can be
Enabled or Disabled (the default status). You can enable or disable
IGMP spoofing with the
described on page 41-35.
The current state of IGMP spoofing on the system, which can be
Enabled or Disabled (the default status). You can enable or disable
IGMP spoofing with the
described on page 41-31.
The current state of IGMP zapping on the system, which can be
Enabled or Disabled (the default status). You can enable or disable
IGMP zapping with the ip multicast zapping
described on page 41-33.
The current state of IGMP querier forwarding on the system, which can
be Enabled or Disabled (the default status). You can enable or disable
IGMP Querier forwarding with the
command, which is described on
Displays the default IGMP version, which can be 1, 2 or 3. Use the
multicast version command to modify this parameter.
Displays the IGMP robustness value, ranging from 1 to 7. (The default
value is 2). Use the ip multicast robustness
parameter.
OmniSwitch 6250 CLI Reference Guide
IP Multicast Switching Commands
ip multicast status
command, which is described on
ip multicast proxying command, which is
ip multicast spoofing command, which is
command, which is
ip multicast querier-forwarding
page 41-5.
command to modify this
command, which is
page
ip
November 2009