Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual page 1848

Defaults
Defaults for optional parameters are as follows:
parameter
port
retries
seconds
ssl | no ssl
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
The dn_name must be different from the search_base name.
•
Use the no form of the command to remove an LDAP server from the configuration. Only one server
may be removed at a time.
•
The port number configured on the switch must match the port number configured for the server.
Examples
-> aaa ldap-server topanga5 host 10.10.3.4 dn cn=manager password tpub base c=us
retransmit 4
-> no aaa ldap-server topanga5
Release History
Release 6.6.1; command was introduced.
Related Commands
show aaa server
aaa authentication
aaa accounting session
page 43-8
default
389 (SSL disabled)
636 (SSL enabled)
3
2
no ssl
Displays information about AAA servers.
Specifies the AAA servers to be used for authenticated switch
access.
Specifies the accounting servers to be used for Authenticated
Switch Access.
OmniSwitch 6250 CLI Reference Guide
AAA Commands
November 2009