Vlan Ipmvlan - Alcatel-Lucent OmniSwitch 6250 Cli Reference Manual

vlan ipmvlan

Creates an IP Multicast
vlan ipmvlan ipmvlan-id [{enable | disable} | [{1x1 | flat} stp {enable | disable}]] [name name-string]
[svlan]
no vlan ipmvlan ipmvlan-id [-ipmvlan-id2]
Syntax Definitions
ipmvlan-id
enable
disable
1x1
flat
stp enable
stp disable
name-string
svlan
ipmvlan-id2
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 6250
Usage Guidelines
•
Use the no form of this command to delete a single or multiple IPMVLANs. If the specified IPMV-
LAN(s) does not exist, an error message will be displayed.
•
If ipmvlan-id does not exist or if ipmvlan-id exists as VLAN Stacking VLAN or Standard VLAN, an
error message will be displayed.
•
Use the svlan parameter to specify that the IPMVLAN should be used in the VLAN Stacking environ-
ment.
•
The default mode of the IPMVLAN is the Enterprise mode.
page 42-2
VLAN.
Specifies the IP Multicast VLAN number. The valid range is 2–4094.
Enables IPMVLAN.
Disables IPMVLAN.
Specifies that the switch is running in the 1x1 Spanning Tree mode.
Specifies that the switch is running in the Flat Spanning Tree mode.
Enables Spanning Tree for the specified IPMVLAN.
Disables Spanning Tree for the specified IPMVLAN.
Alphanumeric string up to 32 characters. Use quotes around the string if
the name contains multiple words with spaces between them (for exam-
ple, "Alcatel-Lucent VLAN").
Tags the IPMVLAN to be used in VLAN Stacking environment.
Th last IPMVLAN number in a range of IPMVLANs that you want to
configure.
default
enable
OmniSwitch 6250 CLI Reference Guide
IP Multicast VLAN Commands
November 2009