Please note:
•
The time axis is fixed and will not be influenced by a Reference Mea-
surement.
•
If no Reference Measurement is available but the TTC/12TC is active
the start value equals the reference plane of the "Open" calibration
measurement.
•
Best practice is to take a measurement with a connected TDR-probe
(if applicable) but without a DUT.
5.1.3 Impedance Measurement Properties Window
The Impedance Measurement Properties Window gives the user the oppor-
tunity to specify his measurement objects in more detail (see Fig. 6). It can
be opened via the Main Window menu entry Edit
Figure 6: Impedance measurement properties window
T3SP-Series Operator's Manual
Properties.
49
931776 RevE