Idas Parameters; Table 6-20: Idas Data Channel Properties - Teledyne 200E Instruction Manual

Model 200E Instruction Manual
Property
NAME The name of the data channel.
TRIGGERING The event that triggers the data channel to
EVENT measure and store its data parameters. See
APPENDIX A-5 for a list of available
triggering events.
NUMBER AND A User-configurable list of data types to be
LIST OF recorded in any given channel. See
PARAMETERS APPENDIX A-5 for a list of available
parameters.
STARTING DATE The starting date when a channel starts
collecting fata
SAMPLE PERIOD The amount of time between each data point
that is averaged into one mean reported
every REPORT PERIOD.
REPORT PERIOD The amount of time between each channel
data point.
NUMBER OF The number of reports that will be stored in
RECORDS the data file. Once the specified limit has
been exceeded, the oldest data are over-
written to make space for new data.
RS-232 REPORT Enables the analyzer to automatically report
channel values to the RS-232 ports.
COMPACT Enables a compact version of the RS-232
REPORT reporting with up to five parameters sharing
the same output line.
CHANNEL Enables or disables the channel. Provides a
ENABLED convenient means to temporarily disable a
data channel.
CAL HOLD OFF Disables sampling of data parameters while
instrument is in calibration mode.
Note that - when enabled here - there is
also a length of the DAS HOLD OFF after
calibration mode, which is set in the VARS
menu. (Section 6.5.)

6.10.1.2. iDAS Parameters

Data parameters are types of data that may be measured and stored by the iDAS. For each
T-API analyzer model, the list of available data parameters is different, fully defined and not
customizable. Appendix A-5 lists firmware specific data parameters for the M200E. The
044100102 Rev A

Table 6-20: iDAS Data Channel Properties

Description
Operating Instructions
Default Setting Range
"NONE" Up to 6 letters and
digits (more with
APICOM, but only
the first six are
displayed on the
front panel).
ATIMER Any allowed event.
PMTDET Any available
concentration,
temperature,
pneumatic or
diagnostic
parameter.
01-JAN-03 Any actual date in
the past or future.
000:01:00 000:00:01 to
366:23:59
(Days:Hours:Minut
es)
000:01:00 000:00:01 to
366:23:59
(Days:Hours:Minut
es)
100 1 to 1 million,
limited by available
storage space.
OFF OFF or ON
OFF OFF or ON
ON OFF or ON
OFF OFF or ON
87