Press the Open Template button and select the itx-file with the
pre-definitions.
Press the Apply to Selection button.
5.1.4 User-defined Impedance Masks
Fig. 7: User-defined (segmented) tolerance mask
The software supports user-defined (also called segmented) impedance masks
as shown in Fig. 7). Masks can be
•
defined manually by clicking the button Edit segmented Mask Values,
•
loaded from an XML definition file by clicking button Load segmented
Tolerance Mask (a sample XML file is included in the software instal-
lation and can be found in the program subfolder Examples),
T3SP-Series Operator's Manual
44
931776 RevB